PRO TIPS FOR INSTALLATION
- INSTALL IN A CLEAN, WELL-LIT AREA
- WARM ENVIRONMENTS IMPROVE ADHESION.
- IF NECESSARY, USE A HAIRDRYER ON LOW HEAT TO HELP AID ADHESION
- TAKE YOUR TIME. THE DIFFERENCE BETWEEN A GOOD INSTALL AND A GREAT INSTALL IS PATIENCE.
1. CLEAN THE SURFACE
- REMOVE DIRT, OILS, AND FIGERPRINTS USING ISOPROPYL ALCOHOL AND/OR MICROFIBER CLOTH.
- ALLOW THE SURFACE TO DRY COMPLETELY.
2. TEST FIT FIRST
- BEFORE REMOVING THE BACKING, IDENTIFY EACH PIECE AND FAMILIARIZE YOURSELF WITH WHERE IT BELONGS.
3. START WITH ANCHOR POINTS
- ALIGN THE MOST OBVIOUS EDGES, CORNERS, BUTTONS, OR OPENINGS FIRST.
- LIGHTLY TACK THE PIECE INTO PLACE.
4. REPOSITION IF NEEDED
- IF ALIGNMENT ISN’T PERFECT, GENTLY LIFT AND REPOSITION BEFORE APPLYING FIRM PRESSURE.
5. WORK SLOWLY
- PRESS FROM THE CENTER OUTWARD.
- AVOID STRETCHING THE MATERIAL DURING INSTALLATION.
6. APPLY FINAL PRESSURE
- ONCE SATISFIED, FIRMLY PRESS ALL SURFACES AND EDGES.
- PAY SPECIAL ATTENTION TO CORNERS AND HIGH CONTACT AREAS.
7. ALLOW ADHESIVE TO SETTLE
- FOR BEST RESULTS, ALLOW THE ADHESIVE TO FULLY BOND FOR 24 HOURS BEFORE HEAVY USE.
DESIGNED IN TEXAS.
ACTUALLY f'n MADE IN TEXAS.
